{"title":"Effect Pedals Amplifier","description":"","products":[{"product_id":"mxr-micro-amp-m-133-46852","title":"MXR - Micro-Amp M-133","description":"\u003cp\u003e\n\tThis device adds a preset amount of gain, using a single control. With a guitar, this lets you boost your signal for lead work, adjust between two different guitars with unmatched output (i.e., humbucker to single coils), or it can supply a permanent boost in a long effects chain where signal drop off is a problem. Power: Single 9-volt battery or Dunlop ECB-003 AC Adapter - Controls: Footswitch toggles amp on\/bypass (red LED indicates on) Gain knob adjusts total output volume when micro amp Is engaged\u003c\/p\u003e","brand":"MXR","offers":[{"title":"Default Title","offer_id":40817447010378,"sku":"46852","price":163.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/7113\/6842\/files\/1153456694_MXR_MICRO_AMP_M133_463x342_jpg.jpg?v=1766722564"},{"product_id":"darkglass-element-headphone-amp-cabsim-12168","title":"Darkglass - ELEMENT Headphone amp – Cabsim","description":"\u003cp\u003eOne comprehensive device, that out of the box offers a bank of 5 cabinet simulations, and the ability to change them through the Darkglass Suite, Bluetooth technology to listen to backing tracks while playing, rehearsing, or studying. Two headphone outputs to allow interaction among musicians. XLR output to connect the Element to your audio interface or PA system. With a uniquely innovative approach, the Element provides in one device an immensely practical tool to empower modern musicians.\u003c\/p\u003e\n\n\u003cp\u003eFeatures\u003c\/p\u003e\n\n\u003cp\u003ePhones\u003c\/p\u003e\n\n\u003cp\u003eTwo touch sensitive volume control sliders, one for each headphone output.\u003c\/p\u003e\n\n\u003cp\u003eBlend\u003c\/p\u003e\n\n\u003cp\u003eA touch sensitive slider to set the blend between the main input (Instrument\/Amp in) and the backing track (Bluetooth\/Aux in) for the headphone out mix.\u003c\/p\u003e\n\n\u003cp\u003eUSB\u003c\/p\u003e\n\n\u003cp\u003eOne USB-C port for transferring impulse responses and firmware XLR output updates\u003c\/p\u003e\n\n\u003cp\u003eAux In\u003c\/p\u003e\n\n\u003cp\u003eYou can connect the line\/headphone out of your laptop\/keyboard\/mixer etc. into the 3.5 mm aux input on the Element.\u003c\/p\u003e\n\n\u003cp\u003eDIMENSIONS\u003c\/p\u003e\n\n\u003cp\u003eWidth: 64 mm (2.95 in) | Height: 111 mm (4.37 in) | Depth : 35 mm (1.77 in)\u003c\/p\u003e","brand":"Darkglass","offers":[{"title":"Default Title","offer_id":40979093618762,"sku":"12168","price":389.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/7113\/6842\/files\/12168.jpg?v=1766655094"},{"product_id":"jhs-pedals-summing-amp-utility-16019","title":"JHS Pedals - Summing Amp Utility","description":"\u003cp\u003eThe JHS Pedals Summing Amp gives you the ability to take two inputs and blend them into one output. Simply plug into the two marked inputs and then plug in your single output and you’re ready to go. From two signals the Summing Amp creates one mono signal.\n\u003cbr\u003eThis is perfect for putting effects in parallel so that they are not affected by one another. The Edge used this technique in the 80s with his delays. When you have a quarter note delay and a dotted eighth delay and you place them in parallel then sum them back together, the effect is that both delays come through more clearly and are not “delaying the delays”. This can also be used with overdrives so that they are not pushing each other as in series, but sit atop one another in parallel. Another use is combining fuzz and compression in parallel so the fuzz isn’t getting choked by the compression.\n\u003cbr\u003eThe Summing Amp gives you the ability to use effects together in completely new ways that you may never have imagined and can open up new and inspiring sounds with your old effects. This simple little box takes two inputs and creates one output but it adds up to a whole lot more!\n\u003cbr\u003eTHIS PEDAL REQUIRES STANDARD 9V DC NEGATIVE POWER, CONSUMES 19MA, AND MEASURES 3.6\"X1.5\"X1\"\n\u003cbr\u003eThe Summing Amp is designed to work with input signals that are below 14V input gain. Anything above 14V INPUT GAIN will cause the unit to clip.\u003c\/p\u003e","brand":"JHS Pedals","offers":[{"title":"Default Title","offer_id":40979130974282,"sku":"16019","price":125.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/7113\/6842\/files\/16019.jpg?v=1766646303"},{"product_id":"tech-21-sansamp-fly-rig-5-fl5-v2-4805","title":"Tech 21 - SansAmp Fly Rig 5 FL5-V2","description":"The original Fly Rig, introduced in 2014, was a true game-changer for players in all categories, from touring pros to bedroom hobbyists. At a time when pedalboards were expanding and backs were breaking, the innovative Fly Rig enabled players to slim down without sacrificing great tone, and travel without fear of baggage surcharges and dreaded mystery backlines. Going beyond being just a multi-effects unit, the all-analog SansAmp technology enables any Tech 21 Fly Rig to be an actual “rig.” You can run directly into mixers of recording desks and PA systems, as well as augment your existing amplifier set-up. Always seeking to improve our offerings and listening to customer feedback, we’ve incorporated some new features to follow the same form factor as later Fly Rigs, such as the Bass, Acoustic, and Paul Landers Signature PL1. The Fly Rig 5 v2 retains the same SansAmp heart, Plexi\/Cali distortion and Delay, but adds a few twists and turns within these sections. New features include an independent reverb with choice of room size, an effect loop, a tuner, and an XLR Output.\n\n\u003ciframe width=\"520\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/0fJVTht8BKI?rel=0\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\n\nSANSAMP\nHas the tonality of the Blonde Character Series pedal. It includes 3-band active EQ, Level and Drive controls. To dirty things up, you have the flexibility of using the Drive control, the Boost function, or you can add grit from the Plexi\/Cali section. Or all three. Each method achieves different tones.\n\nPLEXI \/ CALI\nProvides the dirtier side of the Fly Rig. You have a choice of a roaring Plexi tone with its muscular crunch, detailed mids and mule-kick low end or the chunk of a ‘70s high gain amp tone inspired by the then-boutique shop over on the West Coast. Each mode can be dialed in to your liking with dedicated Drive, Tone and Level controls.\n\nBOOST\nSwitchable Pre\/Post Boost up to approx 12dB to beef up drive and distortion or increase the overall volume to punch up fills and solos.\n\nDELAY WITH TAP TEMPO\nVoiced for the sounds of a vintage tape echo, with Time and Repeats controls. The Delay includes a switch to change from 1\/4-notes to dotted 8ths. A Drift button adds a random, unpredictable element to the modulation in keeping with its vintage roots. \n\nREVERB\nIndependent footswitchable reverb with choice of large and small “room sizes.”\n\nEFFECT LOOP\nPost-SansAmp, pre-effects to patch in external effect pedals.\n\nTUNER\nChromatic Tuner, operable via the BLONDE\/TUNER footswitch. You simply hold the footswitch down to engage, which simultaneously mutes the signal path.\n\nADDITIONAL FEATURES\n- 1\/4-inch 1megOhm input\n- XLR output with ground lift\n- 1\/4-inch low impedance output\n- Rugged, all-metal housing\n- Metal footswitches and jacks\n- Silent-switching, custom footswitch actuators\n- Measures 12.5”l x 2.5”w x 1.25”h • Weight: 20.7 oz.\n- Utilizes included 9V DC Universal Power Supply: Model #DC9.\n\n“Auto-switching,” self-adjusting 100V-240V, 200mA. Includes interchangeable international prong assemblies for EU, UK, Australia\/New Zealand for use anywhere in the world.","brand":"Tech 21 NYC","offers":[{"title":"Default Title","offer_id":40979263750218,"sku":"4805","price":459.0,"currency_code":"CAD","in_stock":true}]},{"product_id":"disaster-transport-legacy-reissue-the-original-delay-modulation-machine-28321","title":"Disaster Transport™ Legacy Reissue The Original Delay Modulation Machine","description":"\u003cp\u003eLimited to 3,500 units worldwide. Behold! The newest incarnation of one of our most beloved pedals ever, the Disaster Transport. For those of you well versed in the pedal’s celebrated history, you might notice some differences on this beautifully sparkly box. A new Mod Mode switch allows you to bend or stretch the modulation wave. The new Mod Speed switch offers three rates of modulation, from bizarrely animated gradual climbs and steep drop offs to rapid chorus and intense vibrato. \u003c\/p\u003e\n\n\u003cp\u003eThe delay line has been redesigned to reduce the noise floor and improve the quality of the delay. Plus, it’s now filtered to sound more like an analog delay than any of the previous versions. With knobs to control the Speed, Intensity, Mix, Repeats, and Time; this analog-voiced digital delay sits perfectly in the background with an evolved ambiance, but can also be dialed in for the dramatic effect of your choosing.\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":40979361366090,"sku":"28321","price":299.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/7113\/6842\/files\/28321.jpg?v=1766624107"},{"product_id":"blackstar-dept-10-amped-2-dept-10-amped-2-24911","title":"Blackstar - Dept. 10 AMPED 2  - DEPT. 10 AMPED 2","description":"\u003cp\u003eA portable 100W pedal amp with onboard effects makes AMPED 2 perfect for the guitar player that wants an all-in-one pedal-amp and effects processor.\u003c\/p\u003e\n\n\u003cp\u003e100W Amp + FX in a Compact Pedal:\n\u003cbr\u003e-  AMPED 2 is a 100 Watt pedal power amplifier with drive pedals in the front end, and an advanced effects processor, capable of delivering the tone and feel of traditional valve amps.  You can use it in the front end of a traditional amp, power a cabinet at 100 Watts or go direct, ensuring you can take your sound with you anywhere.  Power reduction down to 1W and USB-C connectivity means it’s equally at home in the studio or the stage.\u003c\/p\u003e\n\n\u003cp\u003eHigh Headroom Power Amp Design:\n\u003cbr\u003e-  The power amplifier’s unique, high-headroom design does not compromise on output even at 16 Ohms.  Get maximum power and optimum tone with any cabinet set-up at 8 or 16 Ohms. \n\u003cbr\u003e Blackstar’s patented Response control offers distinctly different and authentic power valve responses and guitar amp dynamics.\u003c\/p\u003e\n\n\u003cp\u003eSpeaker Simulator and Direct Outputs:\n\u003cbr\u003e-  Fine-tune your cabinet, mic, and room simulations with our CabRig technology and output via XLR or stereo jack.  Alternatively, connect via USB for effortlessly simple recording to your DAW without the need for an interface.\u003c\/p\u003e\n\n\u003cp\u003eAdvanced Effects Processor:\n\u003cbr\u003e-  Four studio quality, fully configurable, built-in effects pedals (Drive, Modulation, Delay and Reverb) provides unparalleled versatility.\u003c\/p\u003e\n\n\u003cp\u003eKey Details:\u003c\/p\u003e\n\n\u003cp\u003e-  100w Performance ready amp with multi effects.\n\u003cbr\u003e-  Unique high-headroom design that automatically matches to the speaker impedance to deliver maximum power and optimum tone with any 8 or 16Ohm cabinet set-up.\n\u003cbr\u003e-  Response control delivers three distinctly different and authentic power valve responses – EL34, 6L6 and EL84.  Each setting delivers the response, dynamics, sag and break-up characteristics of the selected valve power amp.\n\u003cbr\u003e-  Choose from USA, UK and Classic Amp voicings to dial in your perfect tone.\n\u003cbr\u003e-  3 drive voices – Boost, Drive and Fuzz.\n\u003cbr\u003e-  Effects include Modulation, Delay and Reverb.\n\u003cbr\u003e-  Pro connectivity and integration into your setup using low latency USB audio as an interface for recording, TRS stereo line out and XLR Mono D.I. for live use.\n\u003cbr\u003e-  Effects loop, 2x 9V DC outputs and MIDI control for easy integration into your pedalboard or rig.\n\u003cbr\u003e-  On board Chromatic Tuner allowing for tuning on the fly during live performances.\u003c\/p\u003e\n\n\u003cp\u003eSPECIFICATIONS:\u003c\/p\u003e\n\n\u003cp\u003ePOWER:  100W\n\u003cbr\u003eTYPE:  Digital with Class D Power Amp\n\u003cbr\u003eVOICE:  USA, UK, Classic\n\u003cbr\u003eEQ:  Bass, Middle, Treble\n\u003cbr\u003ePOWER REDUCTION:  100W, 20W, 1W\n\u003cbr\u003eRESPONSE:  EL84, EL34, 6L6\n\u003cbr\u003eDRIVE:  Drive, Type (Boost, Drive, Fuzz), Tone, Level\n\u003cbr\u003eMODULATION:  Time, Type (CH\/FL, Tremolo, Phaser), Depth, Level\n\u003cbr\u003eDELAY:  Time, Type (Linear, Analogue, Shimmer), Feedback, Level\n\u003cbr\u003eREVERB:  Time, Type (Room, Spring, Plate), Level (more settings via Architect)\n\u003cbr\u003eUSB AUDIO:  Yes (4 channel)\n\u003cbr\u003eXLR CABRIG OUTPUT:  Yes\n\u003cbr\u003eEFFECTS LOOP:  Yes (series or parallel selectable in Architect)\n\u003cbr\u003eMIDI CONTROL:  Yes\n\u003cbr\u003eSPEAKER OUTPUTS:  8 Ohm, 16 Ohm\n\u003cbr\u003e9V DC OUTPUTS:  2 (maximum combined current 500mA)\n\u003cbr\u003eVOLTAGE:  100V to 240V ~ 50\/60Hz\n\u003cbr\u003eWEIGHT:  1.96kg\n\u003cbr\u003eDIMENSIONS:  288 x 80 x 149 (mm)\u003c\/p\u003e","brand":"Blackstar","offers":[{"title":"Default Title","offer_id":40979365167178,"sku":"24911","price":899.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/7113\/6842\/files\/24911.jpg?v=1766623555"},{"product_id":"electro-harmonix-big-muff-pi-2-dual-op-amp-fuzz-pedal","title":"Electro-Harmonix - Big Muff Pi 2 Dual Op-Amp Fuzz Pedal","description":"\u003cp\u003eThe Lost Slice of Pi Rediscovered!\u003c\/p\u003e\n\u003cp\u003eBig Muff Pi 2:\u003c\/p\u003e\n\u003cp\u003e- Electro-Harmonix founder and president, Mike Matthews, and serial inventor, Bob Myer, go way back. Together, they designed the very first Big Muff and had a working relationship throughout EHX's storied history. Always innovating, Bob was known to present Mike with updated designs to keep up with available technology of the times. As the process goes, designs get selected and others get put aside and forgotten about. The Big Muff Pi 2 Dual Op-Amp design is one that didn't make the cut back in the late 70's and was promptly stashed away in Bob's files. While interviewing Bob in his old workshop, EHX disciples Josh Scott (of JHS Pedals) and Daniel Danger uncovered this novel circuit design as a hand-drawn schematic amongst Bob's old notes. Josh went to work decoding the original schematic and resurrected the circuit as the Big Muff Pi 2.\u003c\/p\u003e\n\u003cp\u003e- The Big Muff Pi 2 is similar to the classic Big Muff Pi but has a unique fuzz tone to further fill out your Muff flavor palate. With singing sustain and gobs of gain, the BMP2 remains true to the Big Muff Pi legacy with its own edge and response. A crispy top end, booming lows, and slightly less refined clipping gives the Big Muff Pi 2 a particularly cool feel that's both unique and distinctly Big Muff. Slightly more dynamic, slightly more fuzzy, the Big Muff 2 is must-try for any BMP lover!\u003c\/p\u003e\n\u003cp\u003e- Featuring the familiar control set of volume, tone, and sustain, the Big Muff Pi 2 comes in a nano-sized die-cast chassis with art designed by EHX aficionado, Daniel Danger. \"SUSTAIN\" controls the amount of sustain and distortion from medium grit to full fuzz fury. \"TONE\" adjusts the tone from brash rasp to deep thunder, increasing treble and decreasing bass as it's turned up. \"VOL\" sets the overall output of the pedal.\u003c\/p\u003e\n\u003cp\u003e- The Big Muff Pi 2 features a first for a Big Muff, silent true-bypass footswitching with latching\/momentary action. Click the footswitch for normal latching functionality or press and hold the footswitch of a momentary burst of fuzz mayhem!\u003c\/p\u003e\n\u003cp\u003e* Unique Big Muff Pi Circuit Design Employing 2 Dual Op-Amps\u003cbr\u003e* Artwork by Daniel Danger\u003cbr\u003e* \"VOL\", \"TONE\", and \"SUSTAIN\" Controls\u003cbr\u003e* True Bypass\u003cbr\u003e* Latching\/Momentary Footswitch Action\u003cbr\u003e* 9-V Battery Included, Adapter Optional\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cp\u003e- Circuit: Analog\u003cbr\u003e- Audio: Mono\u003cbr\u003e- Power Supply: 9-V Battery Included (Optional 9.6-VDC 200-mA Power Adapter Not Included)\u003cbr\u003e- Dimensions: 5.75\" x 3.45\" x 2.75\"\u003cbr\u003e- Current Draw: 15 mA\u003cbr\u003e- Year Released: 2025\u003c\/p\u003e","brand":"Electro-Harmonix","offers":[{"title":"Default Title","offer_id":43164369879114,"sku":"86638","price":166.55,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/7113\/6842\/files\/BM2_Front-300x300.jpg?v=1766723928"},{"product_id":"strymon-aa-1-amp-attentuator-z120-aa1","title":"Strymon - AA.1 Amp Attentuator - Z120-AA1","description":"\u003cp\u003e\u003cstrong\u003eBridge Between Worlds.\u003c\/strong\u003e\u003cbr\u003eAA.1 is designed to be your bridge between the world of guitar pedals and the world of Eurorack modular. This compact 4HP amplifier attenuator module has everything you need to interface your modular with your guitar effects pedals as well as with your guitar or bass.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMerge Guitar With Modular.\u003c\/strong\u003e\u003cbr\u003eAA.1 is purpose built to combine your guitar gear and Eurorack modules in just about any way you can imagine. Connect a pedal to the effects send and return of Magneto. Use your guitar or bass as a signal source for mangling and warping with your modular gear. Send an instrument level stereo master output from your modular rack to your computer audio interface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOn The Level.\u003c\/strong\u003e\u003cbr\u003eAA.1 is designed to solve all the issues that arise when introducing guitar gear to the world of Eurorack. Most Eurorack modules output very hot audio signal levels that can easily overload the inputs of effects pedals or computer audio interfaces. And it’s not just the output of the modules: Audio inputs in a Eurorack system also need to receive hot signals. AA.1 amplifies the input and attenuates the output signals to the appropriate levels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy to Use.\u003c\/strong\u003e\u003cbr\u003eAA.1 is straightforward to use. The 1\/4″ stereo input amplifies guitar level signals by +18dB, outputting the amplified signal through left and right 1\/8″ outputs (use the left output for mono). Left and right 1\/8″ inputs attenuate Eurorack level signals by -18dB, sending the attenuated signal through left and right 1\/4″ outputs suitable for outputting to guitar level products.\u003c\/p\u003e\n\u003cp\u003eSTEREO IN – Amplifies Guitar Level signals by +18dB. Tip is routed to L OUT, Ring is routed to R OUT. For mono signals, use L OUT.\u003cbr\u003eL and R OUT +18 dB – Designed to patch into Eurorack inputs. Signal source is STEREO IN.\u0026amp;nbsp;Signal gain is +18dB.\u003cbr\u003eL and R 1\/8” IN – Attenuates Eurorack level signals by -18dB.\u003cbr\u003eL and R OUT -18dB – Designed to patch into Guitar Level Products. Signal source is L and R 1\/8” IN. Signal attenuation is -18 dB.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePOWER\u003c\/strong\u003e\u003cbr\u003e+12V rail: 10mA max\u003cbr\u003e-12V rail: 10mA max\u003cbr\u003e+5V rail: 0mA\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAudio Quality\u003c\/strong\u003e\u003cbr\u003eAmplifier: Gain: +18dB\u003cbr\u003eMax Input Level (before soft clipping): 2.25Vpp\u003cbr\u003eMax Output: 18Vpp\u003cbr\u003eInput Impedance: 1 MΩ\u003cbr\u003eOutput Impedance: 1 kΩ\u003cbr\u003e20Hz – 20kHz, +\/- 1dB\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAttenuator\u003c\/strong\u003e:\u003cbr\u003eGain: -18dB\u003cbr\u003eMax Input Level (Nominal): 20Vpp\u003cbr\u003eMax Output Level (Nominal): 2.5Vpp\u003cbr\u003eInput Impedance: 8 kΩ\u003cbr\u003eOutput Impedance: 880 Ω\u003cbr\u003e20Hz – 20kHz, +\/- 1dB\u003c\/p\u003e","brand":"Strymon","offers":[{"title":"Default Title","offer_id":43344072966218,"sku":"75073","price":185.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/7113\/6842\/files\/aa1_hero_grey1.png?v=1772250425"}],"url":"https:\/\/stevesmusic.com\/collections\/effect-pedals-pitch-amplifier.oembed","provider":"Steve's Music Store","version":"1.0","type":"link"}