“IF WE DON'T HAVE IT,
YOU DON'T NEED IT!TM

IF YOU CAN'T FIND IT HERE,
CALL US TOLL FREE:

1-877-978-3837
Neumann - KH805 Sub
Neumann - KH805 Sub
$1,950.00
Financing available for as low as $174.63/month for 12 months. See details at checkout.

Availability: In Stock

  • Steve's Code: 59228
  • Shipping Weight: 20.00lbs
  • Manufactured By: Neuman



THE OPTIMAL COMPLEMENT FOR STEREO APPLICATIONS
The KH 805 has a bypassable 2.1/0.1 Bass Manager with four LFE routing modes, fourth order crossovers and adaptable acoustical controls. There are uses for the KH 805 in many different system configurations.

APPLICATIONS
Increasing the maximum SPL of loudspeakers by up to 8 dB
Decreasing harmonic and intermodulation distortion of loudspeakers
Reproducing the LFE channel
Reproducing the “Sub” signal of a bass managed multichannel source
Making a Plane Wave Bass Array™ system
Working as an extension for KH 810, KH 870 and KH 805 subwoofer systems

SPECIFICATIONS

Free field frequency response ±6 dB 17 … 600 Hz
Free field frequency response ±3 dB 18 … 300 Hz
Reproduction accuracy between 50 Hz and 100 Hz: 100%, 80%, 50% of subwoofers produced ±1.20; ±0.54; ±0.28 dB
Self-generated noise at 10 cm (with input gain set to 100 dB SPL for 0 dBu) <20 dB(A) SPL
Sine wave output with a THD < 0.5 % at 1 m in half space 95 dB SPL (>45 Hz)
Bass capability: Max. SPL in half space at 3% THD at 1m (averaged between 50 Hz and 100 Hz) 110.7 dB SPL
Max. long term SPL with pink noise at 2.3 m, in typical listening conditions (single / pair full range) 112 dB SPL
Analog input(s) 2 x XLR: analog electronically balanced
Analog input impedance >13k Ohms
Max. input level +24 dBu
Common mode rejection ratio (CMRR) > 56 dB @ 15 kHz
Crosstalk (1 kHz), level matching -95 dB; ±0.1 dB
Volume control NRC 1 hardware remote or RS-232
Volume control range; resolution 118 dB; 0.25 dB
Analog dynamic range; THD+N 119 dB(A); <0.001% (-100 dB)
Signal routing modes Right; LFE 120 Hz; Wide; Daisy-chain
LFE Gain 0 / +10 dB
Analog output(s) 3 x XLR; analog electronically balanced
Input gain control (sensitivity) +2 ... -12 dB
Output level control (output level in 1 m based on 0 dBu input level) 100; 114 dB SPL
Controller design Analog, active
Crossover frequency 80 Hz
Crossover slope 24 dB/oct; 4th order
Equalization: Low cut 30 Hz; 0 … -12 dB
Equalization: Parametric EQ: Gain +4 ... -12 dB
Equalization: Parametric EQ: Frequency Bypass; 20 ... 120 Hz
Equalization: Parametric EQ: Q 1 ... 8
Phase 0; 45; 90; 135 and 0/180 deg
Protection circuitry Peak and thermo limiters
Infrasonic filter: frequency; slope 6.5 Hz; 12 dB/oct.
Remote control Bass management on/off via a standard foot switch (optional) on a 6.3 mm jack
Display: On; Normal Operation Green LED
Display: Limit / Clip / Errors / Protection /Boot Mute / Shut Down Mute Red LED
Display: Bass Management on Green LED
Output power woofer amplifier (THD+N with limiter deactivated: 10%) 200 W
Output power woofer amplifier (THD+N with limiter deactivated: 0.1%) 160 W
Mains Power Supply: input voltage; frequency 220-240 / 100-120 V (switchable); 50/60 Hz
Power consumption (230 V / 100 V): Idle 14 W
Power consumption (230 V / 100 V): Full output 280 W
Cabinet material Wood cabinet, aluminum electronics panel
Cabinet surface finish; color (front / back) Painted; metallic anthracite (RAL 7021) / black (RAL 9005)
Operating conditions +10° C to +40° C (+50° F to +104° F); <90% RH, non-condensing
Transport/storage conditions -25° C to +70° C (-13° F to 158° F); <90% RH; non-condensing
Woofer 265 mm (10") with magnetic shielding and protecting black metal grille
Product dimensions (height x width x depth) 360 x 330 x 645 mm (14.2" x 13" x 25.4")
Internal net volume 45.1 liters
External net volume 76.6 liters
OR