The Slöer Stereo Ambient Reverb builds on our popular Slö lineup but adds 2 additional reverb algorithms, stereo width control, 2 additional modulation wave shapes, and the ability to control the sample rate. Now you can create immersive, lush, modulated, sleepy, and ambient soundscapes with more width and depth than ever before.

Save your favorite dreamscapes with 3 onboard presets by simultaneously pressing and holding down on the bypass and sustain switches. Scroll through them by simultaneously pressing and releasing bypass and sustain.

The 5-way rotary dial allows 5 different reverb modes - the 3 you know and love from the Slö: Dark (Lower Octave), Rise (Ambient Swell), and Dream (Latching Pad); and the addition of 2 new modes: Rain (Delay Tap Diffusion) and Light (High Octave Shimmer). Secondary functions on the dial change between 5 different wave shapes for modulation on the reverb trail.

Combine deep modulation, long washy trails, and an immersive stereo field to experience Slöer.

Algorithms:

- Dark

- Rise

- Dream

- Rain

- Light

- Sine

- Warp

- Sink

- Square

- Random

Momentary Functions:

Bypass

- When the switch is in the off position, press and hold to temporarily activate the effect to add a moment of reverb texture. Releasing the switch turns the effect off, and fades it out.

Sustain

- When pressed, the decay switch ramps up the reverb trail to maximum creating a long dreamy reverb trail, and then ramps back down to the decay knob setting when released. In the "Dream" algorithm, the sustain switch is latching. Press it once to capture and sustain the current reverb decay for extremely long pad-like sounds. Press it again to let the reverb trail taper off, based on the position of the decay knob.

Trails Mode:

- The Slöer can run in trails or no-trails mode. In trails mode, when you turn the pedal off, the reverb decay dies off naturally. In no-trails mode, the decay is abruptly cut off when you turn the pedal off. To toggle between either mode, hold down the bypass switch for 1 second while applying power to the pedal. Unplug power and repeat to toggle to the other mode.

Preset Spillover:

- When scrolling through presets, there is only preset spillover if the next preset is the same algorithm as the one preceding it. For example, if your red and green presets are both in Dream mode, switching from red to green will not cut your reverb trails.

Specs:

- The Slöer comes in a matte black finish with cream ink

- The die-cast enclosure's exact size is 4.79" x 3.62" x 2.25" including knobs

- Power requirements are 9 VDC (100 mA minimum)

- The use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended.

- Power supply not included